-
MUTAI AC 400V 3P+N 50A 63A 80A 100A 125A 160A 180A 250A Smart Recloser Automatic Disyuntor Circuit Breaker
CMTM5L series residual current protection circuit breaker is a newly developed product of our company. It is an integrated, multifunctional, overcurrent adjustable circuit breaker, suitable for low-voltage power grid with three-phase four-wire neutral point directly grounded. It can provide indirect contact protection against personal electric shock hazards, and can also protect against grounding faults, overcurrent, short circuits, etc. of lines or electricity.
The product conforms with the standard of IEC60947-1 -
CMTM6RT Series 400A 3P Thermal Electromagnetic Circuit Breaker
The CMTM6RT adjustable molded case circuit breaker is a newly upgraded circuit breaker developed by the company. It was designed by combining the advantages of similar international products with the demands of both domestic and international markets. This MCCB is primarily used for distributing electric power energy, protecting circuits and power equipment from overload, short circuit, and undervoltage. It is also suitable for line conversion and infrequent motor starting.
-
MUTAI Manufacturer AC 380V 660V CJX2-F630 3 Phase Magnetic Contactor
The CJX2 series AC contactor is characterized by its simple design and can be used in various occasions. It can effectively connect and break circuits, facilitate frequent starts, and control AC contactors. Additionally, when combined with a thermal overload relay, this product provides circuit overload protection. This combination forms an electromagnetic starter.
-
MUTAI 220v 400v 4 Phase Household AC Contactor Supplier
HCH8 series household AC contactor are suitable for using in the circuit up to the rated voltage 400V AC 50Hz or 60Hz, rated current up to 63A. The products are used for family, hotel, apartment ,automatic cut off or connect the power ect
-
New Design AC SPD Surge Protective Device Supplier & manufacturer
Surge protection devices (SPD) are essential for safeguarding electronic equipment against lightning. They serve to restrict the sudden overvoltage of power and signal transmission lines to levels within the equipment’s tolerance range, or to divert potent lightning currents safely to the ground, shielding the protected equipment or system from potential harm.
-
CMTQ2 16 ~ 63 Amp ATS Generator Automatic Transfer Switch
The CMTQ2 automatic transfer switch (ATS) is designed for AC 50/60Hz, with a rated operating voltage of 400V and a rated current of 63A or less. It is available in 2-pole or 4-pole configurations and is commonly used in office buildings, markets, banks, stations and hospitals. This product complies with IEC/EN60947-4-1 standard.
-
MUTAI 220v 3 Pole 20ka AC SPD Surge Protective Device
Surge protection device(SPD) is an indispensable device for lightning protection of electronic equipment. It is used to limit the
instantaneous overvoltage of the power line and signal transmission line to the voltage range that the equipment or system can
withstand, or a powerful lightning current drains into the ground to protect the protected equipment or system from impact and
damage. -
CMTGQ1-100E Solar Energy ATS Dual Power Automatic Transfer Switch
The dual power automatic switch is a newly developed miniature household power switch, which is mainly used to test whether the main power supply or standby power supply is normal. When the normal power supply is abnormal, the standby power supply starts to work immediately, which ensures the continuity, reliab小ty and safety of power supply.
The dual power automatic switch is suitable for emergency power supply systems with 50 or 60Hz and rated 400V AC. A TS has the characteristics of solid structure,reliable conversion,convenient installation and maintenance and long service life It is widely used in various occasions where power failure cannot be sustained, and can be operated by electricity or manually. ATS is composed of TSE and controller
-
MUTAI 1000V 3 Pole 40ka DC SPD Surge Protective Device
Surge protection device(SPD) is an electronic device that provides safety protection for various electronic equipment, instruments, and communication lines. It is mainly used to limit overvoltage and discharge surge current. Surge protectors are generally connected in parallel with the equipment to be protected. When overvoltage occurs, they can have the effect of shunting and limiting voltage. Prevent excessive current and voltage from damaging the equipment.
-
MEB2NLE-50 C10 1P+N RCBO Residual Current Operated Circuit Breaker
Residual Current Operated Circuit Breaker (RCBO) is a circuit breaker with leakage current protection, overcurrent protection, and short circuit protection functions. It is mainly used in the field of electrical line protection where there is a risk of leakage. Generally, such lines work in complex environments. Or connect multiple electrical devices .
-
MUTAI MEL-18 Residual Current Circuit Breaker 4P 40A RCCB
Function of switching and isolationProvides protection against electrical shock resulting from direct or indirect contactEnsures safety by preventing fire hazards caused by insulation faultsSuitable for use in residential, commercial, and industrial applicationsLacks overload and short circuit protection
-
MUTAI CMTB1LE-63 4P Residual Current Operated Circuit Breaker RCBO
CMTB1LE-63 Residual Current Operated Circuit Breaker has the function of electric shock, short circuit ,overload faults . The RCBO is typically installed in commercial and residential buildings, and conforms IEC61009-1 standard.
-
Whatsapp
whatsapp
8618066376807
-
Wechat
Wechat
mutaielectric
-
Top